 arcdivid.zip 6/23/97 Creates additional snap points on a selected arc. I.E. Instead of mid, select 3/4 point, etc. Credit: Jeff Foster
선택된 호에 추가할 스냅 포인트 생성. 중간대신 3/4 선택등.
|
arcver.zip Determines vertex point of arc and returns value for use with lineor polyline command. Credit: Theo Armour
호의 최고점을 지정해서 라인이나 polyline 명령 사용을 위한 값을 대치한다.
|
arrow.zip Nice routine for drawing arrowheads. Credit: Peter Staehling
화살촉모양 드로잉을 위한 작업.
|
att.zip A routine that will Draw an Arc tangent to a line and through a point. Credit: Mitchell A. Wawzonek
점이 라인과 접촉하는 호를 그리는 작업.
|
bcal.zip 5/02/97 A bend calculator. Works transparently. Credit: Owen Wengerd
굴곡 계산하기.
|
bdev.zip 5/02/97 A bend developer. Credit: Owen Wengerd
굴곡 만들기.
|
bisect.zip Pick two lines and a bisector is drawn. Credit: Bill Melcher
두선을 선택하면 이등분선이 그려짐.
|
boff.zip 10/08/96 Combines the OFFSET and BPOLY commands into one. Nice routine. Credit: Tony Tanzillo
offset과 bpoly 명령을 하나로 합침.
|
box.zip Pick two points and a polyline box is drawn. Credit: Jeff Foster
두선을 선택하면 polyline상자가 그려짐.
|
details.zip 10/08/96 Select an area to enlarge into a detail. Includes autotrimming. Credit: Victor V. Jensen
자세히 확대하기 위해 한지역 선택이 가능하며 자동 절단이 됨.
|
dtl.zip 10/08/96 Another routine that extracts a section of a drawing for a detail. Credit: Robert McNeel & Assoc.
상세히 보기 위해 드로잉의 일부분을 선택 할 수 있다.
|
eg.zip Quick little routine for creating crossing lines to represent timber end section. Credit: Doug Wolff
재료와 단면을 보여주기 위한 횡선 만들기.
|
fillrect.zip 05/03/97 Create a filled rectange with 2 picks. Credit: Jeff Foster
2번의 선택으로 채워진 직사각형 만들기.
|
gear.zip Excellent routine for drawing gears. Credit: Bill Kramer
드로잉 조정을 위한 작업.
|
ghantt.zip Sweet routine for creating Ghantt Charts. Credit: Greg MacGeorge and Bill Kramer
ghantt 차트 생성을 위한 작업.
|
grass.zip Excellent routine that draws a line of grass with random height, spacing and angles. Credit: Watson Kilbourne
임의의 높이, 간격, 각도의 풀을 그림.
|
mceldl.zip 01/27/97 Make multi-copies of a single entity -- user defined # of copies, and user defines delta.. Credit: Todd Ingle
물체의 복사본을 만듬. 사용자가 #, 데이터등을 정의.
|
moffset.zip 05/03/97 Running offset command with prompting of measurement.
치수 프롬프트와 함께 offset 명령어 운용.
|
ncopy.zip 05/03/97 Duplicate a selected entity, even if it is nested. Credit: Troy Davis
네스팅된 물체까지로 복제.
|
offdel.zip 05/02/97 Offsets a line then deletes the original. Credit: Chris Lovelock
원래 선을 삭제하고 새로운 선을 만듬.
|
pcom.zip Pick the entity and this executes the command associated with the entity. Credit:
물체를 선택하면 결합된 물체의 명령어가 실행된다.
|
ploffst.zip 05/02/97 Select entity to offset to both sides and give it a layer. Credit: Art Houghton
물체의 양면을 만들어 주는 작업으로 레이어를 생성시킨다.
|
roughen.zip 05/02/97 Routine to 'roughen' a polyline. Credit: Mark Middlebrook
polyline을 거칠게 하기 위한 작업.
|
sinsert.zip 05/02/97 Very fine enhancement to the Measure command. A must have. Credit: Tony Tanzillo
측정을 위한 강화된 명령어.
|
star.zip Creates a star from a picked point, radius and number of points. Credit: Carl Guerin
선택한 점으로부터 그 수 만큼 별을 만듬.
|
tag.zip 05/02/97 Leader for adding tags and descriptions. Justifies text appropriately. Credit: Byron Blattel
태그와 묘사 첨부.
|
threads.zip 05/02/97 This routine draws any unified screw thread profile. Credit: Paul Davisson
일치된 나사줄 그리기.
|
vpline.zip Generates vanishing lines from one point on screen. Credit: Watson Kilbourne
화면의 한점으로부터 없어진 라인을 생성함.
|
CadwinNesting
